close× Call Us: +65 6251 1121
close×

NT 2504 Network DSP Amplifier

NT 2504 sideNT 2504 backNT 2504 APP

NT 2504  1000 Watt 4-Channel Networking Amplifier with DSP Processing

VERSATILE DIGITAL NETWORK AMPLIFIER WITH DSP PROCESSING

Features:

  • 4-channel amplifier – 250 watts per channel
  • 4 ohm and constant voltage models available (70V or 100V)
  • 4-in x 4-out sophisticated matrix mixing makes routing easy
  • Optional Dante networking (model no. DT44)
  • Internal sampling rate set at 48kHz
  • 24-bit A/D D/A conversion
  • Extensive internal signal processing
  • Remote user control through Asystems Windows software
  • Real-time error notifications via email reporting function
  • DSP Processing:
    • Automatic Mixing
    • Limiters
    • 10-band EQs
    • 2- and 3-way Crossovers
    • Output Delay
  • Password protected user accounts

Specifications:

NT2504
Low Z, Stereo Mode, all channels driven (RMS Power Ouput Per Channel)
8Ω, 20Hz-20kHz 1%THD150W
4Ω, 20Hz-20kHz 1%THD250W
Low Z, Bridge Mode, all channels driven (RMS Power Output)
8Ω, 20Hz-20kHz 1%THD500W
Distributed Output (RMS Power Output Per Channel)
70V, 100V, 20Hz-20kHz 1%THD250W
Models Available4Ω and 8Ω / 70.7V Constant Voltage / 100V Constant Voltage
Please consult your sales assistant for information on ordering the model that is best for you
SystemAmp CircuitryD
Input Sensitivity1.42 Vrms
Distortion (SMPTE-IM)<0.02%
Noise (Unweighted 20 Hz – 20 kHz below rated power)107 dB
Damping Factor>300 @ 8Ω
Frequency Response20 Hz-20kHz +-1dB; -3dB: 5Hz-50kHz
Input Impedance20 kΩ balanced; 10 kΩ Unbalanced
CoolingVariable Speed Fans – front to rear flow
Indicators-40dB,-6dB, -3dB, Clip/Protect, Bridge (one per two-channel group), Power, Disable, Standby/Unlock, Protect
Front PanelAC power switch & gain control
ControlOperation ModeStereo / Bridge Mono
Voltage Gain40 x (32 dB)
Network ControlBuilt-in Ethernet, 10/100 Mbit/s
ConnectionsInput (Line-level)4 x 3-pin Euroblock Connectors
Output (Powered)4 x 2-pin Euroblock Connectors
Protection CircuitryAmplifier ProtectionTotally Short / Open / Overheat / VLF / RF protection / Mismatched loads stabilize the transition
Load ProtectionOn / Off squelch / AC coupling / Triac crowbar (each channel)
Power SupplyPower Consumption375W
Power Requirements (Region Dependent)100 – 120VAC, 220 – 240VAC, 50/60Hz

 

Click here to download Asystems NT Series T2508_2504_1308_1304 Network Amplifier Brochure

Click here to download Asystems NT Series Network Amplifier User Manual

Add to Wishlist